pillow sham – Things You Need to sew a pillow sham flange: Pillow-shaped light yard average, Fabric, Tape measure, Scissors, Straight pins, Sewing marker, Ruler10 inch machineIron, Fabric. Measure and cut a piece of fabric to measure a square that is 13 1/2 inches wide and long. Measure and cut two rectangles of fabric measuring 13 1/2 inches wide and 9 inches long. Hem one edge of each 9-inch piece of fabric by folding the fabric over twice half inch to the wrong side of the fabric. Pin and stitch straight along the hem edge with the sewing machine.
Place the fabric 13 inches square on a flat surface with the right side of the fabric facing up. Place the two rectangles, right side down, on top of the square. Match the corners and overlapping rectangles. Pin the edges with pins. Sew a straight stitch around the edge, 1/4 inch from the edge with the sewing machine. Turn the pillowcase on the right side through the edge of the overlay ply. Iron flat pillow sham. Measure and mark a line of 3 inches from the outer edge using a ruler and fabric marker. along a straight line marked through all layers of the fabric with the stitch sewing machine. Insert the pillow form.