Round Throw Pillows – Place a baking pizza on a sheet of freezer paper. Trace around the edge of the pizza pan to create a perfectly round circle on the paper. Cut the drawn on paper with a sharp pair of scissors template. Fold the fabric in half with the right side of the fabric facing. Place it on a flat surface. Then template secured with pins in the two layers of fabric, so that the pins pass through the insole and the folded layers. Place pins 2 to 3 inches (5 to 7.5 cm) apart on the outer edge of the fabric. And than cut around the template to create two circles of cloth that are the same size. Remove the pins and the template.
Hold the two circles on the right side of the fabric facing. Place the end of the ornament along the edge of the fabric. Adornment secured with pins on the edge of one side of the fabric. Securing it continues around the edge of the fabric until you reach the starting point. Cut the excess adornment. Sew all the layers of fabric and ornament together to 1/2 inch (1.2 cm) from the edge of the circles using a machine or needle and thread. Leaving an opening 2 inches (5 cm) and 2 inches (5 cm) without sewing motif.
After that turn the circle out through the opening of 2 inches (5 cm), allowing right sides of the fabric facing. Fill the cushion with fiberfill until desired firmness. Fiberfill introduced through the opening 2 inches (5cm) to let the sewing circles together. And the last sew the opening shut with a needle and thread. Fold the edges until they are flush with the closed edge and place the ornament between the layers. Pulling the threaded needle through all layers of fabric. Continue sewing until you have closed the gap.