Typically, track support closet wire shelving is guaranteed in drywall anchors or beams behind the drywall, but can also be attached to a wooden support with wood screws. Wire shelves come in standard lengths up to 12 inches. Many stores will cut the size of the on-demand platform, or you can cut it using a hacksaw or bolt cutters.
Will information you all about closet wire shelving that drill two pilot holes into the wood support 4-6 inches apart with a Phillips screwdriver or power drill. Tighten the horizontal rails to support the wood with wood screws every 4 to 6 inches. Spot rate on horizontal rails to prove that fact. If you do not remove the degree of horizontal rail and redrill holes for wood screws along the flat, horizontal line.
5 Slide the uprights on the horizontal rails at intervals of 4-6 inches. Set the uprights every 4 inches along the horizontal rails to provide greater support for the platform; less support, space them 6 inches. Make sure that the media is no more than 4 inches from the end of the runway. Place the closet wire shelving in the uprights, and snaps into place. Such information can we convey to you all, may be useful for you all.