Bunk beds with desk underneath are a great way to win space extra in a room. Of course, there are many different ways of doing this, everything from using cabinetry as supports for shelves or the construction of a table beneath it. The important thing is that you have a plan before you start, and you’re on the safe side rather than price. Do not be cheaper at the expense of strength and robustness. Based on your plan, you may need more wood than the instructions below if you ask. These instructions are to create a simple bunk unadorned, but you can always add the decorations.
Measure the mattress bunk beds with desk underneath. Do you think all double mattresses come in a standard size, but they do not come? Measure the dimensions and cut your sheet of plywood to give you a bonus of 2.5 cm on each edge (5 cm longer and wider than the mattress). Sand all. Now you have all the basics, cut touchable pieces. , you can have potential cracks in abundance! Take the time for all flat surfaces and especially all edges. If they really are bad, you may have to use a hand sander or scraper to work with the cracked parts. It is better to do it now than later.
Screw the wide plates for long boards. If you pre-drilling bolt holes, will find it easier to put them, since there will be no irregularities. Make sure you start screwing the shorter boards to the ends of the boards. Thus, the plywood base precut will fit perfectly in the box opening. Cutting of the boards 5 cm by 5 cm to fit in the width of the housing at each end thereof. Then cut two boards to complete the remaining space, 7.5 cm shorter than the actual length of the box. Here, when screwed into the bottom of the box, will form a support which supports the plywood. Glue the pieces of the tips and then screw in the depending on bunk beds with desk underneath