Black Bedroom Vanity is not a regular piece of bedroom furniture, so a homeowner who wants to add one can choose to build one to get what he wants. Matching wood in the current bedroom is the top priority, especially if the furniture is colored.
Apply glue to 1 inch pieces (knobs), place them on the bottom of the Black Bedroom Vanity, rinse with the front, and attach them with the 2d box nails. Measure from one of the long sides and make four marks up the edge of the 3/8 inch. Drill recesses the holes on these marks. Glue to the end edges of the 48-inch full plywood, place it between two pieces from Step 1, and secure them with 1 inch or 2 inch screws. Secure it to those with 4d finish nails. Set nail heads with nail set.
Turn Bedroom Vanity over so the top is down. Draw a line at the bottom of the upper edge of the shelf as a guide. Place the shelf toward the back of the bedroom vanity and draw a line there as well. Place the remaining two gables on the worktop. Apply glue to one of the short and one of the long edges and place the end panel on the lines. Attach it to the back with or screws. Repeat this for the other end of the bedroom vanity. Place one of the shelves between the two gables and at the top to help keep it in place while turning on the vanity on the back and secure the gables to the top with the finish nails.